The unique shin guard is made of a special plastic material, which has a low melting point. The special plastic type is already formable at 62 degrees, which means that in a few seconds you can make the shin guard formable and then easily shape a shin guard that fits uniquely to the dimensions of your shin. All you need is boiling water and a heat-resistant dish, and it takes no more than 10 minutes to make a set of shin guards! Our shin guards also have the advantage of being able to be cut so that it gets just the size you want. This way you can ensure maximum comfort, from a shin guard that fits uniquely to your shin and which is exactly the size you want.See how to shape the shin guard here

For maximum shock absorption, foam can be applied to the inside of the shin guard. NOTE: If foam is applied, the guard cannot be remolded.

The sock is a compression sock. The compression increases the circulation in the lower leg and can relieve fatigue and reduce discomfort in the lower leg during and after hard physical activity. The weaving technique used in the sock is the latest on the market, ensuring that the sock provides maximum support around the foot, ankle and tibia, and thus give the comfort you need to be able to perform your best. See how to put the sock on here

There is a reinforcement by the Achilles Tendon where there is increased compression. Studies have shown compression applied directly on the Achilles Tendon can alleviate pain during and after activity, related to the Achilles tendon. The compression prevents the Achilles Tendon from swelling, and also provides a support that protects against the constant vibrations experienced in the tendon during activity.

The sole has a dotted silicone coating that extends from the front foot to the back of the heel. This creates friction with the sole in the boot, which makes your grip in the boot more solid, providing better contact to the boot and the floor. The sock itself is made from a material called SoftAir Plus, which transports sweat faster away from the skin than cotton or other synthetic materials. This keeps your foot drier, and combined with the silicone coating, minimizes the risk of blisters.

The sock is equipped with an inner pocket that keeps your shin guard in place without the use of sock tape or underwrap. The pocket has a lower limit, which makes your shin guard will never slip down. At the same time, the general compression in the sock makes the shin guards stable, no matter how much you run, kick and tackle.

The unique shin guard is made of a special plastic material, which has a low melting point. The special plastic type is already formable at 62 degrees, which means that in a few seconds you can make the shin guard formable and then easily shape a shin guard that fits uniquely to the dimensions of your shin. All you need is boiling water and a heat-resistant dish, and it takes no more than 10 minutes to make a set of shin guards! Our shin guards also have the advantage of being able to be cut so that it gets just the size you want. This way you can ensure maximum comfort, from a shin guard that fits uniquely to your shin and which is exactly the size you want.See how to shape the shin guard here

For maximum shock absorption, foam can be applied to the inside of the shin guard. NOTE: If foam is applied, the guard cannot be remolded.

The sock is a compression sock. The compression increases the circulation in the lower leg and can relieve fatigue and reduce discomfort in the lower leg during and after hard physical activity. The weaving technique used in the sock is the latest on the market, ensuring that the sock provides maximum support around the foot, ankle and tibia, and thus give the comfort you need to be able to perform your best. See how to put the sock on here

There is a reinforcement by the Achilles Tendon where there is increased compression. Studies have shown compression applied directly on the Achilles Tendon can alleviate pain during and after activity, related to the Achilles tendon. The compression prevents the Achilles Tendon from swelling, and also provides a support that protects against the constant vibrations experienced in the tendon during activity.

The sole has a dotted silicone coating that extends from the front foot to the back of the heel. This creates friction with the sole in the boot, which makes your grip in the boot more solid, providing better contact to the boot and the floor. The sock itself is made from a material called SoftAir Plus, which transports sweat faster away from the skin than cotton or other synthetic materials. This keeps your foot drier, and combined with the silicone coating, minimizes the risk of blisters.

The sock is equipped with an inner pocket that keeps your shin guard in place without the use of sock tape or underwrap. The pocket has a lower limit, which makes your shin guard will never slip down. At the same time, the general compression in the sock makes the shin guards stable, no matter how much you run, kick and tackle.

The unique shin guard is made of a special plastic material, which has a low melting point. The special plastic type is already formable at 62 degrees, which means that in a few seconds you can make the shin guard formable and then easily shape a shin guard that fits uniquely to the dimensions of your shin. All you need is boiling water and a heat-resistant dish, and it takes no more than 10 minutes to make a set of shin guards! Our shin guards also have the advantage of being able to be cut so that it gets just the size you want. This way you can ensure maximum comfort, from a shin guard that fits uniquely to your shin and which is exactly the size you want.See how to shape the shin guard here

For maximum shock absorption, foam can be applied to the inside of the shin guard. NOTE: If foam is applied, the guard cannot be remolded.

The sock is a compression sock. The compression increases the circulation in the lower leg and can relieve fatigue and reduce discomfort in the lower leg during and after hard physical activity. The weaving technique used in the sock is the latest on the market, ensuring that the sock provides maximum support around the foot, ankle and tibia, and thus give the comfort you need to be able to perform your best. See how to put the sock on here

There is a reinforcement by the Achilles Tendon where there is increased compression. Studies have shown compression applied directly on the Achilles Tendon can alleviate pain during and after activity, related to the Achilles tendon. The compression prevents the Achilles Tendon from swelling, and also provides a support that protects against the constant vibrations experienced in the tendon during activity.

The sole has a dotted silicone coating that extends from the front foot to the back of the heel. This creates friction with the sole in the boot, which makes your grip in the boot more solid, providing better contact to the boot and the floor. The sock itself is made from a material called SoftAir Plus, which transports sweat faster away from the skin than cotton or other synthetic materials. This keeps your foot drier, and combined with the silicone coating, minimizes the risk of blisters.

The sock is equipped with an inner pocket that keeps your shin guard in place without the use of sock tape or underwrap. The pocket has a lower limit, which makes your shin guard will never slip down. At the same time, the general compression in the sock makes the shin guards stable, no matter how much you run, kick and tackle.

The unique shin guard is made of a special plastic material, which has a low melting point. The special plastic type is already formable at 62 degrees, which means that in a few seconds you can make the shin guard formable and then easily shape a shin guard that fits uniquely to the dimensions of your shin. All you need is boiling water and a heat-resistant dish, and it takes no more than 10 minutes to make a set of shin guards! Our shin guards also have the advantage of being able to be cut so that it gets just the size you want. This way you can ensure maximum comfort, from a shin guard that fits uniquely to your shin and which is exactly the size you want.See how to shape the shin guard here

For maximum shock absorption, foam can be applied to the inside of the shin guard. NOTE: If foam is applied, the guard cannot be remolded.

The sock is a compression sock. The compression increases the circulation in the lower leg and can relieve fatigue and reduce discomfort in the lower leg during and after hard physical activity. The weaving technique used in the sock is the latest on the market, ensuring that the sock provides maximum support around the foot, ankle and tibia, and thus give the comfort you need to be able to perform your best. See how to put the sock on here

There is a reinforcement by the Achilles Tendon where there is increased compression. Studies have shown compression applied directly on the Achilles Tendon can alleviate pain during and after activity, related to the Achilles tendon. The compression prevents the Achilles Tendon from swelling, and also provides a support that protects against the constant vibrations experienced in the tendon during activity.

The sole has a dotted silicone coating that extends from the front foot to the back of the heel. This creates friction with the sole in the boot, which makes your grip in the boot more solid, providing better contact to the boot and the floor. The sock itself is made from a material called SoftAir Plus, which transports sweat faster away from the skin than cotton or other synthetic materials. This keeps your foot drier, and combined with the silicone coating, minimizes the risk of blisters.

The sock is equipped with an inner pocket that keeps your shin guard in place without the use of sock tape or underwrap. The pocket has a lower limit, which makes your shin guard will never slip down. At the same time, the general compression in the sock makes the shin guards stable, no matter how much you run, kick and tackle.

The unique shin guard is made of a special plastic material, which has a low melting point. The special plastic type is already formable at 62 degrees, which means that in a few seconds you can make the shin guard formable and then easily shape a shin guard that fits uniquely to the dimensions of your shin. All you need is boiling water and a heat-resistant dish, and it takes no more than 10 minutes to make a set of shin guards! Our shin guards also have the advantage of being able to be cut so that it gets just the size you want. This way you can ensure maximum comfort, from a shin guard that fits uniquely to your shin and which is exactly the size you want.See how to shape the shin guard here

For maximum shock absorption, foam can be applied to the inside of the shin guard. NOTE: If foam is applied, the guard cannot be remolded.

The sock is a compression sock. The compression increases the circulation in the lower leg and can relieve fatigue and reduce discomfort in the lower leg during and after hard physical activity. The weaving technique used in the sock is the latest on the market, ensuring that the sock provides maximum support around the foot, ankle and tibia, and thus give the comfort you need to be able to perform your best. See how to put the sock on here

There is a reinforcement by the Achilles Tendon where there is increased compression. Studies have shown compression applied directly on the Achilles Tendon can alleviate pain during and after activity, related to the Achilles tendon. The compression prevents the Achilles Tendon from swelling, and also provides a support that protects against the constant vibrations experienced in the tendon during activity.

The sole has a dotted silicone coating that extends from the front foot to the back of the heel. This creates friction with the sole in the boot, which makes your grip in the boot more solid, providing better contact to the boot and the floor. The sock itself is made from a material called SoftAir Plus, which transports sweat faster away from the skin than cotton or other synthetic materials. This keeps your foot drier, and combined with the silicone coating, minimizes the risk of blisters.

The sock is equipped with an inner pocket that keeps your shin guard in place without the use of sock tape or underwrap. The pocket has a lower limit, which makes your shin guard will never slip down. At the same time, the general compression in the sock makes the shin guards stable, no matter how much you run, kick and tackle.